The OSCAR (Oceanographic and Seismic Characterisation of heat dissipation and alteration by hydrothermal fluids at an Axial Ridge) data set is an interdisciplinary collection of physical oceanography and geophysics measurements. Data collection took place in the Panama Basin, bounded in the north-west by the Cocos Ridge, by the Carnegie Ridge in the south and by South and Central America in the east and north, respectively. Measurements were collected during RRS James Cook cruises JC112 and JC113 (05/12/2014 to 16/01/2015), RRS James Cook cruise JC114 (22/01/2015 to 08/03/2015) and RV Sonne cruise SO328 (06/02/2015 to 06/03/2015). The project investigated the effect of the cooling of young oceanic crust close to a mid-ocean ridge. It is here that rapid cooling is dominated by hydrothermal circulation of seawater through the crust, which is then discharged into the ocean along the ridge. Once in the ocean, released heated seawater mixes with the ambient cold water to form a plume, which provides a mechanism to lift the densest waters away from the bottom boundary layer. Data were collected using Bottom Pressure Recorder, Acoustic Doppler Current Profiler (ADCP), Magnetotelluric Lander, CTD, Vertical Microstructure Profiler, Synthetic Aperture Radar, Ocean-bottom seismograph and Multibeam echosounder. Measurement of salinity, oxygen and helium were also made and zooplankton samples collected with vertical net casts. This multidisciplinary, collaborative research project was led by Professor Richard Hobbs at the Department of Earth Science, University of Durham, UK and funded by Natural Environment Research Council (NERC) grant NE/I027010/1.

The Marine Environment Monitoring and Assessment National database (MERMAN) is a national database which holds and provides access to data collected under the Clean Safe Seas Environmental Monitoring Programme (CSEMP) formerly the National Marine Monitoring Programme (NMMP). The data collected are the responsibility of the Competent Monitoring Authorities (CMAs) who collect the samples from stations in UK waters using water sampling techniques, trawls, nets or grabs. The CMAs then send the collected samples to accredited laboratories where they are analysed. A weighting is calculated, based on the quality of the analysis. The weighting score incorporates the laboratory accreditation, reference material, inter-laboratory comparisons, detection limits, uncertainties and standard deviations. Where data do not meet a threshold score they are given a status of ‘FAIL’ and although they are stored they are not made available to external users. The MERMAN dataset starts in 1987 with greater use of the database occurring from 1997 onwards. Data are submitted by the CMAs annually and an annual submission may include updates to legacy data to provide additional data or improve data/metadata. The data held in MERMAN fulfils the UK's mandatory monitoring requirements under the Oslo and Paris Convention (OSPAR) Joint Assessments and Monitoring Programme (JAMP). These data are used in support of European Commission (EC) directives and national assessments, such as Charting Progress 2 and are also supplied to the European Marine Observation and Data Network (EMODNET).

The data set comprises a diverse collection of physical, chemical and biological measurements, encompassing well over 1000 parameters. There are data from over 1000 conductivity-temperature-depth (CTD)/rosette stations, over 440 core profiles, over 180 sediment trap samples, over 140 net hauls and much, much more. The primary study area was a box extending to the base of the slope from Vigo to Cap Finistere. However, data are included from both further offshore (filament tracking) and from the Portuguese Margin. Measurements were taken from November 1996 to October 1999 during 33 cruise legs, involving research vessels from seven nations. Data were collected using a variety of equipment and techniques, including expendable bathythermographs (XBTs), turbulence probes, CTDs and oceanographic undulators with auxiliary sensors. These hydrographic profiles were accompanied by net hauls, plankton recorder deployments, sediment cores and a comprehensive water sampling programmes during which a wide variety of chemical and biological parameters were measured. The station data were supplemented by underway measurements of oceanographic and meteorological properties. Results from production and phosphate uptake experiments are also included in the dataset, as are bathymetric data from multibeam (swath) surveys, coastal upwelling measurements and data from moored instruments and benthic landers. The dataset also includes imagery from satellites, seabed photography and X-ray photographs of core samples. The aim of the project was study biogeochemical processes at the shelf break and to quantify the fluxes of material between the shelf and the open ocean. The project brought together over 100 scientists from 40 research centres and universities throughout Europe. The British Oceanographic Data Centre (BODC) is assembling the data sets collected during OMEX II into its project database system and the data set is also available on CD-ROM.

The data set comprises a diverse collection of physical, chemical and biological measurements, encompassing over 1000 parameters. There are data from over 1650 conductivity-temperature-depth (CTD)/rosette stations, over 300 core profiles, over 370 sediment trap samples and much, much more. Most of this effort was directed at the region of the east Atlantic margin between La Chapelle Bank and the Goban Spur (between France and Ireland). In addition, there were two secondary areas of interest: the Norwegian Shelf Break just off Tromso and the Iberian Margin, either off Vigo or in the vicinity of the Tagus estuary. Measurements were collected from April 1993 until the end of December 1995 during 55 research cruise legs. Data were collected using a variety of equipment and techniques, including expendable bathythermography (XBTs), CTDs and oceanographic undulators with auxiliary sensors. These hydrographic profiles were accompanied by net hauls, plankton recorder deployments, sediment cores and comprehensive water and air sampling programmes during which a wide variety of chemical and biological parameters were measured. The station data were supplemented by underway measurements of oceanographic and meteorological properties. Results from production and trace metal experiments are also included in the dataset, as are bathymetric data from the British Oceanographic Data Centre (BODC) GEBCO digital Atlas, air-sea flux measurements and data from moored instruments and benthic landers that were deployed for periods from a few weeks to a year. The dataset also includes imagery from satellites, water column and seabed photography, scanning electron micrographs and X-ray photographs. FORTRAN source code for biogeochemical models developed during OMEX I is also included. The aim of the project was to study biogeochemical processes at the shelf break and to quantify the fluxes of material between the shelf and the open ocean. OMEX I involved scientists from 30 institutions in 10 countries. BODC is assembling the data sets collected during OMEX I into its database system and the data are also available on CD-ROM.